Upgrading the monster buckle with a chopped bead skull...
Gesendet von meinem Mi 9 Lite mit Tapatalk
What are you working on now?
- Amuthon
- Tinkerer
- Posts: 212
- Joined: December 1st, 2021, 1:25 pm
- Kkstraps
- Super Lost Sheep
- Posts: 92
- Joined: January 8th, 2022, 11:34 am
Re: What are you working on now?
gratitude 1000 times is not necessary. I'm an ordinary guy! and not afraid of competition! let them change and be afraid if there are any difficulties with the manufacture of straps I am happy to share my experience with you and help you in any way.
- Mellons
- Chief bottle washer
- Posts: 4228
- Joined: April 11th, 2018, 6:59 am
Re: What are you working on now?
Wow!
"Ah, I'd love to wear a rainbow every day,
And tell the world that everything's OK,
But I'll try to carry off a little darkness on my back,
'Till things are brighter, I'm the Man In Black."
http://www.homage-forum.com/viewtopic.php?t=27
And tell the world that everything's OK,
But I'll try to carry off a little darkness on my back,
'Till things are brighter, I'm the Man In Black."
http://www.homage-forum.com/viewtopic.php?t=27
-
- Watch Addict
- Posts: 577
- Joined: February 16th, 2022, 2:10 pm
Re: What are you working on now?
Kkstraps wrote: βApril 1st, 2023, 10:49 am [quote=Denis post
gratitude 1000 times is not necessary. I'm an ordinary guy! and not afraid of competition! let them change and be afraid if there are any difficulties with the manufacture of straps I am happy to share my experience with you and help you in any way.
Kkstrsps thank you For now I have a plan to try to make a couple of straps for my watches.. It's not small numbers I also ordered some tools for processing leather.. I will be free to ask for help
- Amuthon
- Tinkerer
- Posts: 212
- Joined: December 1st, 2021, 1:25 pm
Re: What are you working on now?
There wasn't enough space for a stem adaptor,
so I had to cut 0,9mm thread on a 1,2mm stem. Tricky stuff, needed two attempts, crown is on and working [emoji16]
Gesendet von meinem Mi 9 Lite mit Tapatalk
so I had to cut 0,9mm thread on a 1,2mm stem. Tricky stuff, needed two attempts, crown is on and working [emoji16]
Gesendet von meinem Mi 9 Lite mit Tapatalk
- Yoda
- Honorary moderator
- Posts: 8063
- Joined: April 11th, 2018, 9:16 am
- Location: Stockholm
Re: What are you working on now?
Yes, it has to be softened before cutting the thread and then hardened again.
Enviado desde mi fucking Samsung S8.
-
- Watch Addict
- Posts: 577
- Joined: February 16th, 2022, 2:10 pm
Re: What are you working on now?
A little review.. I have never had a Molnija like this before.. The marking is 3602, but it has a lot of elements of 3601.. I guess it is a transitional model.. Year of manufacture 2-66 I just serviced it and it is very precise in all positions.. New my experience was regulation and disassembly of the balance.. She had a problem with magnetism..
https://flic.kr/p/2ordq14
https://flic.kr/p/2or8jKy
https://flic.kr/p/2orctYh
https://flic.kr/p/2ordq14
https://flic.kr/p/2or8jKy
https://flic.kr/p/2orctYh
- Yoda
- Honorary moderator
- Posts: 8063
- Joined: April 11th, 2018, 9:16 am
- Location: Stockholm
Re: What are you working on now?
Good job there! Tweezers number 5?
Enviado desde mi fucking Samsung S8.
-
- Watch Addict
- Posts: 577
- Joined: February 16th, 2022, 2:10 pm
Re: What are you working on now?
Thanks Yoda:) Yes, number 5, only for fine works
- Yoda
- Honorary moderator
- Posts: 8063
- Joined: April 11th, 2018, 9:16 am
- Location: Stockholm
Re: What are you working on now?
It's my favourite when taking apart and putting together.
Enviado desde mi fucking Samsung S8.