From quartz to an ETA 2764.
Hour and minute hands were compatible.
Watch bought at eBay long time ago.
I tried to install a metalic ring instead of the plastic one, without success.
The possitions of the pins of the dial provoque that the 12 hour mark was not completelly centered.
Lumed by me. I wanted to have used the green color instead of the blue one. I put blue by error
Despite those defects I am happy with the watch.
Canteene, from quartz to mecanic.
- Yoda
- Honorary moderator
- Posts: 8063
- Joined: April 11th, 2018, 9:16 am
- Location: Stockholm
Re: Canteene, from quartz to mecanic.
Looks sharp!EP.- wrote: ↑September 11th, 2021, 5:11 am From quartz to an ETA 2764.
Hour and minute hands were compatible.
Watch bought at eBay long time ago.
I tried to install a metalic ring instead of the plastic one, without success.
The possitions of the pins of the dial provoque that the 12 hour mark was not completelly centered.
Lumed by me. I wanted to have used the green color instead of the blue one. I put blue by error
Despite those defects I am happy with the watch.
Enviado desde mi fucking Samsung S8.
- tafari
- VIP
- Posts: 4629
- Joined: April 13th, 2018, 12:35 pm
- Location: germany
Re: Canteene, from quartz to mecanic.
very beautiful build you did, like it a lot [emoji106]
-
Onlinestraps68
- Sponsor
- Posts: 2329
- Joined: April 11th, 2018, 2:13 pm
- Location: Sandara Leatherworks
Re: Canteene, from quartz to mecanic.
Good looking build
straps68
My buckles My straps
Flickr: https://www.flickr.com/photos/sandara_l ... rks/albums
Builds: 6152/1 mini 2 mini 1 Ti
My buckles My straps
Flickr: https://www.flickr.com/photos/sandara_l ... rks/albums
Builds: 6152/1 mini 2 mini 1 Ti