Making a GPF buckle
Posted: July 27th, 2020, 8:14 am
Starting with a blank;
and some tools;
bevel the inside edges;
round the tang cutout;
bevel the outside edges;
and bevel around the corners;
round the sides;
add a tang I made earlier;
And after about 2.5 hours of work, you could call it done but usually it takes another couple of hours to soften the edges and polish/brush the whole thing and then assemble it.
and some tools;
bevel the inside edges;
round the tang cutout;
bevel the outside edges;
and bevel around the corners;
round the sides;
add a tang I made earlier;
And after about 2.5 hours of work, you could call it done but usually it takes another couple of hours to soften the edges and polish/brush the whole thing and then assemble it.
