Need dial and movement diameters (Heuer)

[Yoda]

The dial can be made in any size.

[merlin7734]

It all depends on the movement size.

I’m not dead set on the original movement. A Heuer or ETA movement are perfectly acceptable if it turns out a Master Time is too large for my project.

So between all the awesome dial makers on here and my flexibility... I think this might actually be a reality. I’m more wanting a homage than a perfect conversion anyway

Thank you so much for your guidance master Yoda!


Sent from my iPhone using Tapatalk

[Yoda]

I wish you all the best of luck on the way, please ask anything along the way!

[merlin7734]

I wish you all the best of luck on the way, please ask anything along the way!

You may regret offering that


Sent from my iPhone using Tapatalk

[Yoda]

Not!

[merlin7734]

Question... in my digging I’ve discovered that the three movements used in the Heuer Master-Time were the following:

-Revue Thommen GT
-Revue Thommen 63
-Arogno 28

Does anyone know specs or info on these movements? I’ve been unable to find anything while googling except ads for already sold examples of the Master Time

Thanks!

[Yoda]

Have you looked at Ranfft?

[merlin7734]

I have. Both movements absent from the list unless I searched wrong


Sent from my iPhone using Tapatalk

[Yoda]

Try Google and let it show pictures, sometimes it leads to a site.

[merlin7734]

No luck on specs. It would be super cool to have that 8 day power reserve but I’m thinking it might just be easier to put a different movement in at least to get it running/use it

Most of the new production watches have the seconds hand on a wb dial, correct?


Sent from my iPhone using Tapatalk