What are you working on now?

[Yoda]

Serviced a Landeron calibre 48, repaired a Ulysse Nardin with a Valjoux calibre 23, new staff, hole- and cap jewels.

Landeron calibre 48.jpg

Ulysse Nardin.jpg

[binbin]

Nothing too difficult or crazy, but well worth the time.
Today is a tool day. (Quiet Sunday) Making a few little tools I should have made a long time ago.

First up.....custom emery sticks... no more popsicle sticks.....

DSC_2992-smalls.jpg

DSC_2990-smalls.jpg

Next a couple custom reamers to be made for my Seitz jeweling tool.

[tafari]

Repurposing my vintage Gerstner and Sons dental cabinet to use for.... watch building of course


I think I’m going to take it apart, remove the black faux leather tape, and add a front panel that slides out from the bottom. The two metal hardware pieces you can see below are where I assume some sort of front panel snapped into place before.

that is a wonderful cabinet, I hope u show us the end result


Gesendet von iPad mit Tapatalk

[tafari]

Serviced a Landeron calibre 48, repaired a Ulysse Nardin with a Valjoux calibre 23, new staff, hole- and cap jewels.

Landeron calibre 48.jpg

Ulysse Nardin.jpg

beautiful movements , well done M.

[tafari]

Nothing too difficult or crazy, but well worth the time.
Today is a tool day. (Quiet Sunday) Making a few little tools I should have made a long time ago.

First up.....custom emery sticks... no more popsicle sticks.....

DSC_2992-smalls.jpg

DSC_2990-smalls.jpg

Next a couple custom reamers to be made for my Seitz jeweling tool.

I don’t even know for what the use is, but well done


Gesendet von iPad mit Tapatalk

[Yoda]

Nothing too difficult or crazy, but well worth the time.
Today is a tool day. (Quiet Sunday) Making a few little tools I should have made a long time ago.

First up.....custom emery sticks... no more popsicle sticks.....


DSC_2992-smalls.jpg
DSC_2990-smalls.jpg


Next a couple custom reamers to be made for my Seitz jeweling tool.

Polishing or burnishing purposes?

[binbin]

Nothing too difficult or crazy, but well worth the time.
Today is a tool day. (Quiet Sunday) Making a few little tools I should have made a long time ago.

First up.....custom emery sticks... no more popsicle sticks.....


DSC_2992-smalls.jpg
DSC_2990-smalls.jpg


Next a couple custom reamers to be made for my Seitz jeweling tool.

Polishing or burnishing purposes?

Just for polishing and shaping. One 400, 800, 1200 and 2400. I usually just glue some paper to little wooden stir sticks or popsicle sticks. (True ghetto watchmaker) I like the harder (and flat) surface of the brass. I made one a few weeks ago and it grew on me fast. I've been switching out grades of paper on the one piece and decided I'd make a set.

[earloflondon]

Sorry but can't find proper words to describe...... Dmitry my deep congratulations!!!

Στάλθηκε από το PRA-LX1 μου χρησιμοποιώντας Tapatalk

The case looks like those on watches sold at aliexpress. I'm amazed how it turned out so beautifully. Of course your dial made it to look more and more beautiful too. Congrats @Belkin12


47mm 316L Stainless Steel Watch Case 6497 Movement with Luminous Hands Manual Mechanical Watch
https://a.aliexpress.com/_BTJ0hS

[djolemag]

Sorry but can't find proper words to describe...... Dmitry my deep congratulations!!!

Στάλθηκε από το PRA-LX1 μου χρησιμοποιώντας Tapatalk

The case looks like those on watches sold at aliexpress. I'm amazed how it turned out so beautifully. Of course your dial made it to look more and more beautiful too. Congrats @Belkin12


47mm 316L Stainless Steel Watch Case 6497 Movement with Luminous Hands Manual Mechanical Watch
https://a.aliexpress.com/_BTJ0hS

Chinese cases are getting better every year...

Sent from my P30 using Tapatalk

[Mellons]

Sorry but can't find proper words to describe...... Dmitry my deep congratulations!!!

Στάλθηκε από το PRA-LX1 μου χρησιμοποιώντας Tapatalk

This dial is sublime.... a