Thanks to [mention]Roberespi[/mention] for contacting the seller and making this possible.
A collection of Steeldive parts for replacing on your Ploprof homage. Right now you can get the CG, bezel insert and dial.
I've been told that sterile parts might be available too.
https://a.aliexpress.com/_BP6DHp
Spare parts for your Ploprof homage
- Emilio
- Doom Slayer
- Posts: 8556
- Joined: April 11th, 2018, 3:29 am
- Location: Spain
- Contact:
-
Mini Chat Squatter
I'm hot
Animal
5 year veteran
Frequent Flyer
Moderator
VIP
Prolific poster
HF veteran
Italiano addict
Good neighbour
Spare parts for your Ploprof homage
Panerai reference pictures
https://mega.co.nz/#F!8R0FWaoS!IAasZXfb14Z7R1H6CLYp6w
Instagram
http://instagram.com/emisansev
IMGUR Albums
http://homage-forum.com/viewtopic.php?f=8&t=3508
https://mega.co.nz/#F!8R0FWaoS!IAasZXfb14Z7R1H6CLYp6w
http://instagram.com/emisansev
IMGUR Albums
http://homage-forum.com/viewtopic.php?f=8&t=3508
-
- Super Lost Sheep
- Posts: 25
- Joined: February 24th, 2019, 1:24 am
Spare parts for your Ploprof homage
take care about the measurements:
Ceramic bezel size: 40.90*31.70*1.00mm(exterior diameter*interior diameter*thickness)
Surface size: 32.8*32.5*31.5*0.4mm (wire hole*face diameter*open Surface * thickness)
Bezel size: 41.8*32.7*2.2mm (outer diameter * inner diameter * thickness)
Enviado desde mi iPhone utilizando Tapatalk
Ceramic bezel size: 40.90*31.70*1.00mm(exterior diameter*interior diameter*thickness)
Surface size: 32.8*32.5*31.5*0.4mm (wire hole*face diameter*open Surface * thickness)
Bezel size: 41.8*32.7*2.2mm (outer diameter * inner diameter * thickness)
Enviado desde mi iPhone utilizando Tapatalk
-
- Super Lost Sheep
- Posts: 25
- Joined: February 24th, 2019, 1:24 am
Re: Spare parts for your Ploprof homage
If someone needs a ploprof v1 case i have a spare one, pm to me
Enviado desde mi iPhone utilizando Tapatalk
Enviado desde mi iPhone utilizando Tapatalk
- Emilio
- Doom Slayer
- Posts: 8556
- Joined: April 11th, 2018, 3:29 am
- Location: Spain
- Contact:
-
Mini Chat Squatter
I'm hot
Animal
5 year veteran
Frequent Flyer
Moderator
VIP
Prolific poster
HF veteran
Italiano addict
Good neighbour
Re: Spare parts for your Ploprof homage
That's great. Will come in handyRoberespi wrote: take care about the measurements:
Ceramic bezel size: 40.90*31.70*1.00mm(exterior diameter*interior diameter*thickness)
Surface size: 32.8*32.5*31.5*0.4mm (wire hole*face diameter*open Surface * thickness)
Bezel size: 41.8*32.7*2.2mm (outer diameter * inner diameter * thickness)
Enviado desde mi iPhone utilizando Tapatalk
Panerai reference pictures
https://mega.co.nz/#F!8R0FWaoS!IAasZXfb14Z7R1H6CLYp6w
Instagram
http://instagram.com/emisansev
IMGUR Albums
http://homage-forum.com/viewtopic.php?f=8&t=3508
https://mega.co.nz/#F!8R0FWaoS!IAasZXfb14Z7R1H6CLYp6w
http://instagram.com/emisansev
IMGUR Albums
http://homage-forum.com/viewtopic.php?f=8&t=3508
- Mellons
- Chief bottle washer
- Posts: 4625
- Joined: April 11th, 2018, 6:59 am
-
MM perv
Microbrand guru
5 year veteran
Frequent Flyer
Moderator
VIP
Prolific poster
HF veteran
Italiano addict
Skillful builder
Good neighbour
Re: Spare parts for your Ploprof homage
Have you taken one apart? Would be interesting to see parts...
“The problem with the world is that the intelligent people are full of doubts, while the stupid ones are full of confidence”
http://www.homage-forum.com/viewtopic.php?t=27
http://www.homage-forum.com/viewtopic.php?t=27
-
- Super Lost Sheep
- Posts: 25
- Joined: February 24th, 2019, 1:24 am
Spare parts for your Ploprof homage
I started the ploppy project, but a new finished ploprof appears and i had buy it. If someone has the patience to continue the project, we can talk. I am in Spain.
The only parts that i not have is the DWO and the bezel insert (the one in the photos is not the correct one), too i have the swiss eta 2836 and the 3 wheels to make longer the hands axle.
It is v1 parts except the dial witch is a v2 one (no happy feet in it)
Enviado desde mi iPhone utilizando Tapatalk
The only parts that i not have is the DWO and the bezel insert (the one in the photos is not the correct one), too i have the swiss eta 2836 and the 3 wheels to make longer the hands axle.
It is v1 parts except the dial witch is a v2 one (no happy feet in it)
Enviado desde mi iPhone utilizando Tapatalk
- CROCCODILEMERRY
- Centurion
- Posts: 146
- Joined: April 10th, 2019, 3:06 am
-
5 year veteran
Frequent Flyer
Re: Spare parts for your Ploprof homage
Do you sell the dial?
-
- Super Lost Sheep
- Posts: 25
- Joined: February 24th, 2019, 1:24 am
Re: Spare parts for your Ploprof homage
It is all sold, sorry
Enviado desde mi iPhone utilizando Tapatalk
Enviado desde mi iPhone utilizando Tapatalk