It does look like nothing I've seen before and I had a hunch that it was hand made. Really well done!
New dial movement cleaning in other words spa day for a daily
-
Onlinestraps68
- Sponsor

- Posts: 2474
- Joined: April 11th, 2018, 2:13 pm
- Location: Sandara Leatherworks
-
5 year veteran
Frequent Flyer
Moderator
VIP
Sponsor
Prolific poster
HF veteran
Strap maker
Re: New dial movement cleaning in other words spa day for a daily
straps68
My buckles My straps
Flickr: https://www.flickr.com/photos/sandara_l ... rks/albums
Builds: 6152/1 mini 2 mini 1 Ti

My buckles My straps
Flickr: https://www.flickr.com/photos/sandara_l ... rks/albums
Builds: 6152/1 mini 2 mini 1 Ti

- TimemiT
- Scoundrel

- Posts: 1292
- Joined: May 31st, 2018, 8:21 pm
- Location: Miami
-
Scoundrel
5 year veteran
Frequent Flyer
VIP
Prolific poster
HF veteran
8 giorni nut
Re: New dial movement cleaning in other words spa day for a daily
Awesome work! That is a serious hand setting machine! I'm always curious ... when do you know how much pressure to use when setting hands, and is there a risk of cracking a jewel if using too much pressure?
Alpacalypse Now
-
Xtreme
- Super Lost Sheep

- Posts: 89
- Joined: February 27th, 2020, 8:28 pm
-
HF veteran
Skillful builder
Mad scientist
Re: New dial movement cleaning in other words spa day for a daily
Thanks TimeiT
If you look closely you can see a locking ring (silver knurled ring) this allows me to adjust the limit at which the plunger pushes down on the hand.
It's very precise, also the movement holder has a small pinion support pushing on the opposite side of the center wheel pinion so there is 0 stress on the jewel.
The only drawback is you need to make a specific holder for every movement type.
BTW your avatar is a riot
- TimemiT
- Scoundrel

- Posts: 1292
- Joined: May 31st, 2018, 8:21 pm
- Location: Miami
-
Scoundrel
5 year veteran
Frequent Flyer
VIP
Prolific poster
HF veteran
8 giorni nut
Re: New dial movement cleaning in other words spa day for a daily
Xtreme wrote: ↑January 21st, 2022, 10:38 amThanks TimeiT
If you look closely you can see a locking ring (silver knurled ring) this allows me to adjust the limit at which the plunger pushes down on the hand.
It's very precise, also the movement holder has a small pinion support pushing on the opposite side of the center wheel pinion so there is 0 stress on the jewel.
The only drawback is you need to make a specific holder for every movement type.
BTW your avatar is a riot![]()
![]()
Alpacalypse Now
- daevildog
- Moderator

- Posts: 970
- Joined: April 10th, 2018, 9:01 pm
- Location: In Traffic
-
5 year veteran
Frequent Flyer
Moderator
VIP
HF veteran
Good neighbour