Page 2 of 2
Re: help needed to source certain parts
Posted: November 16th, 2018, 5:57 am
by razl
hako wrote: ↑November 15th, 2018, 3:04 pm
Problem with Aliexpress or the bay is, that the diameter of the dial is probably 39mm.
For Rad-Cases here you need 37mm
When sterile is OK, rmcsherry ( member here) makes excellent work. He can also provide custom hands.
It may be worth to ask River if he sells 2533.
And of course ask pvirus if he can make one.
+1
Ross does a wonderful job at making dials and hands!! You could also try getting in touch with Belkin12 for dials. I’ve had dials done by both of them and they are outstanding!!
I’ve seen pvirus’s thread on custom dials and was blown away with the detailing.
HF is full of great artisans in different disciplines and for the most part you’re never out of options and have someone to always help you build your timepiece!!!
Re: help needed to source certain parts
Posted: November 16th, 2018, 7:38 am
by g3rald
i managed to fit a 3602 into it , another set of problems.
now i need a 36ish mm dial , hands and stem for molly to fully convert.
seems like athaya n river does only for 47mm case for tall hands , im stuck .
Re: help needed to source certain parts
Posted: November 16th, 2018, 2:02 pm
by razl
If your rad case is 45mm,a 36.8mm dial should fit it without any hassle. Belkin12 / Ross (rmcsherry) can be of help to make a dial for you.
River’s double pencil hands (gold double pencil thin end hands set) for molly fits/works fine for the above mentioned dial size without any issue. His listing are there on the bay too if you will. You could just search for the above text in the brace there.
Molly stems for an a6497 also does exist on the bay. You might want to just check the stem thread size of 1.2mm when you search for one.
Re: help needed to source certain parts
Posted: November 16th, 2018, 5:35 pm
by hako
g3rald wrote: ↑November 15th, 2018, 7:42 pm
hako wrote: ↑November 15th, 2018, 3:04 pm
Problem with Aliexpress or the bay is, that the diameter of the dial is probably 39mm.
For Rad-Cases here you need 37mm
When sterile is OK, rmcsherry ( member here) makes excellent work. He can also provide custom hands.
It may be worth to ask River if he sells 2533.
And of course ask pvirus if he can make one.
hi , ty for advise.
i only communicated with river b4 , the rest are foreign to me .but i will check it out
You will find them in the members list
Re: help needed to source certain parts
Posted: November 16th, 2018, 8:16 pm
by g3rald
hako wrote: ↑November 16th, 2018, 5:35 pm
g3rald wrote: ↑November 15th, 2018, 7:42 pm
hako wrote: ↑November 15th, 2018, 3:04 pm
Problem with Aliexpress or the bay is, that the diameter of the dial is probably 39mm.
For Rad-Cases here you need 37mm
When sterile is OK, rmcsherry ( member here) makes excellent work. He can also provide custom hands.
It may be worth to ask River if he sells 2533.
And of course ask pvirus if he can make one.
hi , ty for advise.
i only communicated with river b4 , the rest are foreign to me .but i will check it out
You will find them in the members list
thank u very much .
i changed my mind abt the project as i managed fit my 3602 into it.
am now sourcing for rolerai , 2533 dials in 36mm with compatible hands n stem.
had posted in wtb section
Re: help needed to source certain parts
Posted: November 16th, 2018, 8:18 pm
by g3rald
razl wrote: ↑November 16th, 2018, 2:02 pm
If your rad case is 45mm,a 36.8mm dial should fit it without any hassle. Belkin12 / Ross (rmcsherry) can be of help to make a dial for you.
River’s double pencil hands (gold double pencil thin end hands set) for molly fits/works fine for the above mentioned dial size without any issue. His listing are there on the bay too if you will. You could just search for the above text in the brace there.
Molly stems for an a6497 also does exist on the bay. You might want to just check the stem thread size of 1.2mm when you search for one.
thank u !