Homage Forum

Posted: **March 5th, 2022, 7:41 pm**

Tanukjaju wrote: ↑March 5th, 2022, 6:57 pm
Gatchaman wrote: ↑March 5th, 2022, 6:50 pm Forgot to mention... I put together a mono watch. It's weird. I dunno if I'll ever get used to seeing just one hand on a dial that shows all 12hrs with 5 minute divisions instead of seconds! I'll post pics soon.
One of my weaknesses. Pics please when you can…

Can you recommend me an free image sharing site?

Posted: **March 5th, 2022, 7:50 pm**

https://www.pixelsbin.com/

Posted: **March 5th, 2022, 8:21 pm**

I use imgur now. Set the folders on private so it’s only shared by you sharing links / folders.

Posted: **March 5th, 2022, 9:50 pm**

I created an Imgur account. I'll upload pics soon!

Posted: **March 6th, 2022, 3:37 am**

unreformed66 wrote:The easiest way to solve the mounting screws/tabs problem is to remove the barrel bridge and file out the places that the screws go so that the crescent shaped area is enlarged all the way through instead of just on the top like it is. I use a round file to do this. The problem is that with the ETA movements the mounting screw can screw down all the way to the pillar (base) plate and on the older Unitas movements it can't due to the extra material in the spot marked in red. The modern Chinese cases are designed for the ETA versions of the 6497, not the Unitas. It's a small difference and not hard to fix.

I also do this.

Posted: **March 6th, 2022, 6:31 am**

Friend I cut, trim, step on movement and with little file cut movement holder, after that short screw and make metal clips.. It's not problem if you have space in case for clips. But must move barel bridge.. Sorry for my bed english:(

Homage Forum

Case Clamps for this Movement?

Re: Case Clamps for this Movement?

Re: Case Clamps for this Movement?

Re: Case Clamps for this Movement?

Re: Case Clamps for this Movement?

Re: Case Clamps for this Movement?

Re: Case Clamps for this Movement?