Homage Forum

This belongs in a museum!
If aliens come to visit, I would want this to be the first thing they see from us.

Belkin12 wrote: ↑April 23rd, 2020, 2:44 pm Clean and classic.
45mm sand blasted radi case, domed sapphire, black radial brushed dial, 3602 black Kristall movement, steel hands. Black strap with beige stitch is in works.

Emilio wrote:This belongs in a museum!
If aliens come to visit, I would want this to be the first thing they see from us.

Hey, c’mon! )

Alou wrote:

tafari wrote: ↑April 23rd, 2020, 4:06 pm what is the meaning of the engraving?

Molnija (In Russian) the name of the movement from the Molnija Watch company


https://en.wikipedia.org/wiki/Molnija

thank you , that is cool

5ah1n wrote:

Kinda pilot watch but I need some machinery, movement ring and also dial work

very beautiful movement, looks promising

5ah1n wrote: ↑April 23rd, 2020, 4:33 pm

Kinda pilot watch but I need some machinery, movement ring and also dial work

After [mention]Yoda[/mention] photos that I’m using for ref here’s today result







Just sanding for next weeks.

bmsm wrote:After [mention]Yoda [/mention] photos that I’m using for ref here’s today result







Just sanding for next weeks.

Is there any rust to remove or just patina?
If rust, try to soak it in lemon acid solution(can be bought in grocery in small packs of few grams of powder) , it removes rust nicely. However, try first with one piece , of course
I tested with some old rusty screws and it works...

Sent from my ELE-L29 using Tapatalk

djolemag wrote:

bmsm wrote:After [mention]Yoda [/mention] photos that I’m using for ref here’s today result







Just sanding for next weeks.

Is there any rust to remove or just patina?
If rust, try to soak it in lemon acid solution(can be bought in grocery in small packs of few grams of powder) , it removes rust nicely. However, try first with one piece , of course
I tested with some old rusty screws and it works...

Sent from my ELE-L29 using Tapatalk

Some of them have rust, not much, due to use the metal has some small marks and a little bit of rust.

I was searching about the best way to remove. Thanks for the tip.

Welcome

Sent from my ELE-L29 using Tapatalk