My parcel is still on the way.....
Στάλθηκε από το SM-A202F μου χρησιμοποιώντας Tapatalk
On a knife edge
- Elias Livadaris
- Sponsor
- Posts: 668
- Joined: April 11th, 2018, 6:19 am
- Location: Athens, Greece
-
Animal
5 year veteran
Frequent Flyer
VIP
Sponsor
HF veteran
Skillful builder
Good neighbour
Re: On a knife edge
Wins only the one who dares to try!
- Phaedros
- Tinkerer
- Posts: 492
- Joined: August 24th, 2020, 1:29 pm
-
Car lover
Bike lover
Knife maker
Animal
Frequent Flyer
Strap maker
Mad scientist
Good neighbour
Re: On a knife edge
[mention]Alga[/mention] thank you very much!
[mention]Yoda[/mention] I do have some quick elves - thank you for helping me out here!
[mention]Emilio[/mention] I already made minor changes to the proto design. The most obvious is changeing the thickness of the tang from 1mm to 1,5mm. I might as well alter the shape of the tip slightly. Your input is invaluable!
[mention]odokadolo[/mention] highly appreciated, thank you!
[mention]redmill[/mention] thanks a lot!
[mention]earloflondon[/mention] great! There’ll be a major update to this as soon as I have worked out the changes based on the feedback I received and am about to receive.
[mention]Elias Livadaris[/mention] doesn‘t it always go like this? I finished your buckle first and it was the one I wanted to arrive first too... I am so grateful for you taking your time and expertise on evaluating my work!
[mention]Yoda[/mention] I do have some quick elves - thank you for helping me out here!
[mention]Emilio[/mention] I already made minor changes to the proto design. The most obvious is changeing the thickness of the tang from 1mm to 1,5mm. I might as well alter the shape of the tip slightly. Your input is invaluable!
[mention]odokadolo[/mention] highly appreciated, thank you!
[mention]redmill[/mention] thanks a lot!
[mention]earloflondon[/mention] great! There’ll be a major update to this as soon as I have worked out the changes based on the feedback I received and am about to receive.
[mention]Elias Livadaris[/mention] doesn‘t it always go like this? I finished your buckle first and it was the one I wanted to arrive first too... I am so grateful for you taking your time and expertise on evaluating my work!
„I asked her for gasoline, she gave me water...“
Me, side of the road, pushing my bike.
Me, side of the road, pushing my bike.
- Yoda
- Honorary moderator
- Posts: 8063
- Joined: April 11th, 2018, 9:16 am
- Location: Stockholm
-
Mini Chat Squatter
Car lover
Bike lover
Knife maker
Animal
5 year veteran
Frequent Flyer
VIP
Prolific poster
HF veteran
Watchmaker
Good neighbour
Re: On a knife edge
I have the one made for me now, splendid work and great craftsmanship!
You do not have the required permissions to view the files attached to this post.
Enviado desde mi fucking Samsung S8.
- Nottingham
- Watch Idiot
- Posts: 1840
- Joined: June 11th, 2019, 4:13 am
-
5 year veteran
Frequent Flyer
Prolific poster
Re: On a knife edge
Delicious shape! And a nice buckle makes a nice strap much more nice!
Congrats for your patient work!!!
Congrats for your patient work!!!
-
- Centurion
- Posts: 173
- Joined: September 30th, 2018, 11:05 am
-
5 year veteran
Frequent Flyer
Re: On a knife edge
I am absolutely up for one or more of these when they go live.
It's been a PITA not being able to get knife edge buckles for so long. And these look really good.
Kudos to @Phaedros for fine work here.
Well impressed I am
Guessing you are a guitarist?
'Buckle rash' being a phrase guitarists use to describe the damage done to the back of a guitar by belt buckles...
It's been a PITA not being able to get knife edge buckles for so long. And these look really good.
Kudos to @Phaedros for fine work here.
Well impressed I am
Guessing you are a guitarist?
'Buckle rash' being a phrase guitarists use to describe the damage done to the back of a guitar by belt buckles...
- VanSong
- Watch Idiot
- Posts: 1220
- Joined: April 19th, 2018, 9:26 am
-
Frequent Flyer
Prolific poster
HF veteran
Re: On a knife edge
Very nice knife edge buckle for a prototipo! Now I know who to go to if I need a smaller Knife edge buckle.
Sent from my SM-N960F using Tapatalk
Sent from my SM-N960F using Tapatalk
- Phaedros
- Tinkerer
- Posts: 492
- Joined: August 24th, 2020, 1:29 pm
-
Car lover
Bike lover
Knife maker
Animal
Frequent Flyer
Strap maker
Mad scientist
Good neighbour
Re: On a knife edge
Thank you so much for being part of this - I greatly value your opinion!
[mention]Nottingham[/mention] Thanks - I am really happy you like the shape!
[mention]Nick_B[/mention] Great! I‘m just about to launch the introductory run at reduced pricing. I‘ll put up the info a bit later.
I wouldn’t consider myself a guitarist, more of an overenthousiastic nutcase... but yes - the name comes from the damage a belt buckle does to the backside of a guitar
[mention]VanSong[/mention] Thank you very much! The smaller buckles are fantasy built but I really like the aesthetics, especially with more rugged straps.
A sneak peek into the introductory run:
„I asked her for gasoline, she gave me water...“
Me, side of the road, pushing my bike.
Me, side of the road, pushing my bike.
-
- Centurion
- Posts: 173
- Joined: September 30th, 2018, 11:05 am
-
5 year veteran
Frequent Flyer
Re: On a knife edge
Talisker and Bigsbies and P90s... a potent combination
Just a thought but not everybody might consider 'rash' to be a positive branding. 'Buckle Rush' on the other hand...
Normally there's a six-figure consultancy fee for this kind of stuff :-0 but waived since you are both a fellow musician and a craftsman
Just a thought but not everybody might consider 'rash' to be a positive branding. 'Buckle Rush' on the other hand...
Normally there's a six-figure consultancy fee for this kind of stuff :-0 but waived since you are both a fellow musician and a craftsman
I've got this thread bookmarked...I‘ll put up the info a bit later.
- Phaedros
- Tinkerer
- Posts: 492
- Joined: August 24th, 2020, 1:29 pm
-
Car lover
Bike lover
Knife maker
Animal
Frequent Flyer
Strap maker
Mad scientist
Good neighbour
Re: On a knife edge
Yep, I butchered my old JV pretty badly - she really sings though!Nick_B wrote: ↑May 4th, 2021, 11:02 am Talisker and Bigsbies and P90s... a potent combination
Just a thought but not everybody might consider 'rash' to be a positive branding. 'Buckle Rush' on the other hand...
Normally there's a six-figure consultancy fee for this kind of stuff :-0 but waived since you are both a fellow musician and a craftsman
I've got this thread bookmarked...I‘ll put up the info a bit later.
About the „rash“ - it also refers to the aging or „relicing“ to stay in the guitar lingo...
My seven month old had the idea to firmly occupy her dad for the last few days, hence the little delay.
Anyway - here goes:
I can proudly announce the start of the „introductory run“!
This will be ten I‘ll finish under business conditions, where I‘ll also exactly measure the time it takes me to make the individual buckle. From there I can finally calculate the „real world“ pricing for the ones that might come after that.
Here are the conditions:
A buckle, 24, 26 or 27mm will go for 40$ plus shipping - this price will only last for the first run and is likey to be the lowest it will be. From my calculations off of the protos it is going to almost double that but we‘ll see how fast I can get.
Finish options are:
- brass
- nickel plated
- nickel plated lightly aged (basically just blackened and repolished to give an „old silver“ look)
- nickel plated and aged (blackened and the sharp corners taken off to reveal some of the brass)
- „road kill“ (hit by a truck, mangled and chewed - like the originals in the archive. Nickel worn through, scratches and pitting)
Aging is included in the price of the first run but will be extra in the future.
Payment is due as soon as the buckle is packed up and ready to go. I do take everyone’s word on here that once they order, they’ll take the buckle.
It will take me two weeks to finish this batch, should I not be able to make it in this time frame you are free to retreat from this.
Is there a catch? Of course there is! I am really blown away that already seven buckles are spoken for... three are firmly sold and four are reserved. I‘ll hold on to one for [mention]Nick_B[/mention] as well - this makes only two more that are freely available right now - this might go fast!
Thank you all for this!
Update: six sold, two reserved, two available
Update 2: eight sold, one reserved, one available
„I asked her for gasoline, she gave me water...“
Me, side of the road, pushing my bike.
Me, side of the road, pushing my bike.
- Phaedros
- Tinkerer
- Posts: 492
- Joined: August 24th, 2020, 1:29 pm
-
Car lover
Bike lover
Knife maker
Animal
Frequent Flyer
Strap maker
Mad scientist
Good neighbour
Re: On a knife edge
And the third update: 9 sold, one reserved.
I‘ll start production now. The 1,5mm stock arrived too. I set myself the 19th of may as shipping date.
I‘ll contact every buyer with the payment details as soon as the buckles are done.
Thank you all for your continuous support and the kind words - what a great place to be!
I‘ll start production now. The 1,5mm stock arrived too. I set myself the 19th of may as shipping date.
I‘ll contact every buyer with the payment details as soon as the buckles are done.
Thank you all for your continuous support and the kind words - what a great place to be!
„I asked her for gasoline, she gave me water...“
Me, side of the road, pushing my bike.
Me, side of the road, pushing my bike.