Homage Forum

Emilio wrote:

VanSong wrote:

bmsm wrote: My 2 cents are also crown related. Without the gap there was no space for the crown.

Thanks [mention]Emilio[/mention] for your kind reply! Definitely not questioning your drawing, LOL. As this is very much engineering stuffs and It's totally out of my knowledge area, so am trying to find out why it is constructed in such a way and learn something new from it! [mention]bmsm[/mention] thanks and noted!

Sent from my SM-N960F using Tapatalk

Update

You can appreciate how the stock NW CG has that gap in this pictures.

I have realized that the screw head needs space too so that's maybe another reason.

Ok that explain why the gap!!!

Thank E, for these clarification pictures.

Sent from my SM-N960F using Tapatalk

Another one, a trotting reel from J W Young & Sons, the Purist. The centre pin was a few degrees off and now it is straight.

Sharing my Depth Gauge Fantasy Build drawing conceptualize 3 years plus ago! Not sure when this actually will come to life, but the first thing first, I need to learn 3d drawing to have it mill. This is not a professional drawing, so guys please be nice k. LOL

VanSong wrote:Sharing my Depth Gauge Fantasy Build drawing conceptualize 3 years plus ago! Not sure when this actually will come to life, but the first thing first, I need to learn 3d drawing to have it mill. This is not a professional drawing, so guys please be nice k. LOL

I might use your drawings to make a 3D model, just to play around. If you need help with that, let me know. I would recommend Fusion 360.

Emilio wrote:

VanSong wrote:Sharing my Depth Gauge Fantasy Build drawing conceptualize 3 years plus ago! Not sure when this actually will come to life, but the first thing first, I need to learn 3d drawing to have it mill. This is not a professional drawing, so guys please be nice k. LOL

I might use your drawings to make a 3D model, just to play around. If you need help with that, let me know. I would recommend Fusion 360.

That's very nice and very kind of you, Emilio!

Sent from my SM-N960F using Tapatalk

Another watch un-related project down to the last bits of finishing.

My dad asked me to repair his kitchen knife for him so I did. I used my favorite wood, Padouk, a walnut spacer and bronze pins. It’s great doing things you don’t have to think about every once in a while... this is how far I got in thirty minutes yesterday:



Only minor finishing left to do

VanSong wrote:Sharing my Depth Gauge Fantasy Build drawing conceptualize 3 years plus ago! Not sure when this actually will come to life, but the first thing first, I need to learn 3d drawing to have it mill. This is not a professional drawing, so guys please be nice k. LOL

Can i subscribe for one?

Sent from my LYA-L29 using Tapatalk

calvinktlim wrote:

VanSong wrote:Sharing my Depth Gauge Fantasy Build drawing conceptualize 3 years plus ago! Not sure when this actually will come to life, but the first thing first, I need to learn 3d drawing to have it mill. This is not a professional drawing, so guys please be nice k. LOL

Can i subscribe for one?

Sent from my LYA-L29 using Tapatalk

Wahaha, yes you can if it get realised! But I wish it is that easy and straightforward! The small 8 days keywind movement is rare as hen's teeth and this case is drawn base on it size!

Sent from my SM-N960F using Tapatalk

VanSong wrote:Sharing my Depth Gauge Fantasy Build drawing conceptualize 3 years plus ago! Not sure when this actually will come to life, but the first thing first, I need to learn 3d drawing to have it mill. This is not a professional drawing, so guys please be nice k. LOL

Just a quick mock up

Emilio wrote: ↑March 8th, 2021, 1:21 pm

VanSong wrote:Sharing my Depth Gauge Fantasy Build drawing conceptualize 3 years plus ago! Not sure when this actually will come to life, but the first thing first, I need to learn 3d drawing to have it mill. This is not a professional drawing, so guys please be nice k. LOL

Just a quick mock up

Awesome!


[mention]VanSong[/mention] I love the idea of the sw movement! Do you think there’s any chance for water resistance?