Homage Forum

Emilio wrote:

VanSong wrote:Sharing my Depth Gauge Fantasy Build drawing conceptualize 3 years plus ago! Not sure when this actually will come to life, but the first thing first, I need to learn 3d drawing to have it mill. This is not a professional drawing, so guys please be nice k. LOL

Just a quick mock up

Looking very good, Emilio! Thank you.

Sent from my SM-N960F using Tapatalk

Phaedros wrote:

Emilio wrote: ↑March 8th, 2021, 1:21 pm

VanSong wrote:Sharing my Depth Gauge Fantasy Build drawing conceptualize 3 years plus ago! Not sure when this actually will come to life, but the first thing first, I need to learn 3d drawing to have it mill. This is not a professional drawing, so guys please be nice k. LOL

Just a quick mock up

Awesome!


[mention]VanSong[/mention] I love the idea of the sw movement! Do you think there’s any chance for water resistance?

If you look at my drawing, there are actually flat gaskets in 3 positions! 1st gasket is between top plexi and the case, 2nd gasket is in-between the 2 plexi and the 3rd one is on the screw down case back which you need to unscrew the case back to access to the Key Wind crown's of the 8 days movement!

But this is just drawing and concept. Not sure are there technical issues or is doable on the actual product.

Sent from my SM-N960F using Tapatalk

This is fantastic. Should we move this to members project and give it a life of its own?

Sent from my LYA-L29 using Tapatalk

Hi Emilio, how do you build the lugs in fusion?
Do you fusion them to the core of the case? Or do you build a larger plate and remove the excess from the side and between the lugs?

[mention]VanSong[/mention] : Thank you! And there it was in your drawing all the time, written in red... I do need glasses! Very nice concept - I‘d love to see this built.

toofsy wrote: ↑March 9th, 2021, 1:09 am Hi Emilio, how do you build the lugs in fusion?
Do you fusion them to the core of the case? Or do you build a larger plate and remove the excess from the side and between the lugs?

Good question. I create them from scratch and then, add them to the main body.

I have uploaded this tutorial for you

Emilio wrote: ↑March 9th, 2021, 3:19 am

toofsy wrote: ↑March 9th, 2021, 1:09 am Hi Emilio, how do you build the lugs in fusion?
Do you fusion them to the core of the case? Or do you build a larger plate and remove the excess from the side and between the lugs?

Good question. I create them from scratch and then, add them to the main body.

I have uploaded this tutorial for you

Really nice, thank you very much, it seems more easier that the process I was using.

toofsy wrote:

Emilio wrote: ↑March 9th, 2021, 3:19 am

toofsy wrote: ↑March 9th, 2021, 1:09 am Hi Emilio, how do you build the lugs in fusion?
Do you fusion them to the core of the case? Or do you build a larger plate and remove the excess from the side and between the lugs?

Good question. I create them from scratch and then, add them to the main body.

I have uploaded this tutorial for you

Really nice, thank you very much, it seems more easier that the process I was using.

No problem! Another way of doing it is using the revolve tool and substracting afterwards

[mention]VanSong[/mention] Design is 100% done. Only screws and threads are missing (that's an easy fix)