Homage Forum

konax wrote: ↑May 12th, 2022, 11:47 am

Mellons wrote:

Emilio wrote: ↑May 8th, 2022, 4:45 pm

this one?

https://aliexpress.com/item/1005001586752699.html

Yes this is one, but i cant locate 22mm

Slightly different design, but maybe this will do? 22mm available.
https://a.aliexpress.com/_uYXi2l

Thanks for that it looks interesting

Has anyone gotten one of these? Says 44mm and appears to be a sized down version of the 6152 no-cg case that's been widely available for a while now. I would really like to be able to buy just the case if it is anywhere close to as good as that 47mm case.
https://www.aliexpress.com/item/1005003 ... c1%21%21im

atkin68 wrote:Has anyone gotten one of these? Says 44mm and appears to be a sized down version of the 6152 no-cg case that's been widely available for a while now. I would really like to be able to buy just the case if it is anywhere close to as good as that 47mm case.
https://www.aliexpress.com/item/1005003 ... c1%21%21im

It is same fat mini 6152 case just made for automatic movement

Kp0y wrote: ↑May 13th, 2022, 2:51 pm

atkin68 wrote:Has anyone gotten one of these? Says 44mm and appears to be a sized down version of the 6152 no-cg case that's been widely available for a while now. I would really like to be able to buy just the case if it is anywhere close to as good as that 47mm case.
https://www.aliexpress.com/item/1005003 ... c1%21%21im

It is same fat mini 6152 case just made for automatic movement

Does anyone sell just the case set?

atkin68 wrote:

Kp0y wrote: ↑May 13th, 2022, 2:51 pm

atkin68 wrote:Has anyone gotten one of these? Says 44mm and appears to be a sized down version of the 6152 no-cg case that's been widely available for a while now. I would really like to be able to buy just the case if it is anywhere close to as good as that 47mm case.
https://www.aliexpress.com/item/1005003 ... c1%21%21im

It is same fat mini 6152 case just made for automatic movement

Does anyone sell just the case set?

No.
All was sold last year and no more in production.

Kp0y wrote: ↑May 13th, 2022, 3:03 pm

atkin68 wrote:

Kp0y wrote: ↑May 13th, 2022, 2:51 pm It is same fat mini 6152 case just made for automatic movement

Does anyone sell just the case set?

No.
All was sold last year and no more in production.

Alex, does it fit a 6497 or Molly?

Thanks,
Dave

atkin68 wrote:

Kp0y wrote: ↑May 13th, 2022, 3:03 pm

atkin68 wrote: Does anyone sell just the case set?

No.
All was sold last year and no more in production.

Alex, does it fit a 6497 or Molly?

Thanks,
Dave

It does but you will need a thick dial or a spacer between bezel and dial since automatic movement have different stem profile.
I didn't tried but also can replace the bezel itself, from Silix 3646 for example, NW have this bezels on his site.

Kp0y wrote: ↑May 13th, 2022, 4:28 pm

atkin68 wrote:

Kp0y wrote: ↑May 13th, 2022, 3:03 pm No.
All was sold last year and no more in production.

Alex, does it fit a 6497 or Molly?

Thanks,
Dave

It does but you will need a thick dial or a spacer between bezel and dial since automatic movement have different stem profile.
I didn't tried but also can replace the bezel itself, from Silix 3646 for example, NW have this bezels on his site.

I see now from an old sales post that you used a Unitas 6310N in one. Did that require a spacer? I have a 6325 which is the same movement with with different frequency.

atkin68 wrote:

Kp0y wrote: ↑May 13th, 2022, 4:28 pm

atkin68 wrote: Alex, does it fit a 6497 or Molly?

Thanks,
Dave

It does but you will need a thick dial or a spacer between bezel and dial since automatic movement have different stem profile.
I didn't tried but also can replace the bezel itself, from Silix 3646 for example, NW have this bezels on his site.

I see now from an old sales post that you used a Unitas 6310N in one. Did that require a spacer? I have a 6325 which is the same movement with with different frequency.

Yes, spacer is needed. Interior size is 38.00-38.50mm

Kp0y wrote: ↑May 13th, 2022, 4:41 pm

atkin68 wrote:

Kp0y wrote: ↑May 13th, 2022, 4:28 pm It does but you will need a thick dial or a spacer between bezel and dial since automatic movement have different stem profile.
I didn't tried but also can replace the bezel itself, from Silix 3646 for example, NW have this bezels on his site.

I see now from an old sales post that you used a Unitas 6310N in one. Did that require a spacer? I have a 6325 which is the same movement with with different frequency.

Yes, spacer is needed. Interior size is 38.00-38.50mm

I meant for height, not the movement ring. Thought maybe you chose that movement because of the stem alignment.