What are you working on now?

[tafari]

after 3 days, I was fighting with a cortebert 616, with a damaged hairspring ( looks like a tube). squeezing here and squeezing there today after adjusting the offbeat, the result. God bless it perform with great results again and with a offbeat of 0.3ms I can life

[djolemag]

after 3 days, I was fighting with a cortebert 616, with a damaged hairspring ( looks like a tube). squeezing here and squeezing there today after adjusting the offbeat, the result. God bless it perform with great results again and with a offbeat of 0.3ms I can life

Not bad check if hairspring is touching somewhere at regulator pin or similar...
Good amplitude, what lift angle?

Sent from my LG-D855 using Tapatalk

[djolemag]

after 3 days, I was fighting with a cortebert 616, with a damaged hairspring ( looks like a tube). squeezing here and squeezing there today after adjusting the offbeat, the result. God bless it perform with great results again and with a offbeat of 0.3ms I can life

Offbeat is not so important under 0.8... I can live with more, as long as amplitude is good especially when you have fixed stud balance cock...

Sent from my LG-D855 using Tapatalk

[tafari]

after 3 days, I was fighting with a cortebert 616, with a damaged hairspring ( looks like a tube). squeezing here and squeezing there today after adjusting the offbeat, the result. God bless it perform with great results again and with a offbeat of 0.3ms I can life

Not bad check if hairspring is touching somewhere at regulator pin or similar...
Good amplitude, what lift angle?

Sent from my LG-D855 using Tapatalk

the hairspring looks like new again, flat no touching ,the space is everywhere the same. swinging freely from left to right.
the lift angle I use is 52°

[djolemag]

after 3 days, I was fighting with a cortebert 616, with a damaged hairspring ( looks like a tube). squeezing here and squeezing there today after adjusting the offbeat, the result. God bless it perform with great results again and with a offbeat of 0.3ms I can life

Not bad check if hairspring is touching somewhere at regulator pin or similar...
Good amplitude, what lift angle?

Sent from my LG-D855 using Tapatalk

the hairspring looks like new again, flat no touching ,the space is everywhere the same. swinging freely from left to right.
the lift angle I use is 52°

No, my mistake, I thought if hairspring is touching at regulator pin maybe.
No doubt it is quite well, don't get me wrong

Sent from my LG-D855 using Tapatalk

[slpf]

after 3 days, I was fighting with a cortebert 616, with a damaged hairspring ( looks like a tube). squeezing here and squeezing there today after adjusting the offbeat, the result. God bless it perform with great results again and with a offbeat of 0.3ms I can life

looks good nice work kai

[tafari]

Not bad check if hairspring is touching somewhere at regulator pin or similar...
Good amplitude, what lift angle?

Sent from my LG-D855 using Tapatalk

the hairspring looks like new again, flat no touching ,the space is everywhere the same. swinging freely from left to right.
the lift angle I use is 52°

No, my mistake, I thought if hairspring is touching at regulator pin maybe.
No doubt it is quite well, don't get me wrong

Sent from my LG-D855 using Tapatalk

everything cool, thanks

[tafari]

after 3 days, I was fighting with a cortebert 616, with a damaged hairspring ( looks like a tube). squeezing here and squeezing there today after adjusting the offbeat, the result. God bless it perform with great results again and with a offbeat of 0.3ms I can life

looks good nice work kai

thanks friend, Im a little bit proud an happy it is working well again

[djolemag]

after 3 days, I was fighting with a cortebert 616, with a damaged hairspring ( looks like a tube). squeezing here and squeezing there today after adjusting the offbeat, the result. God bless it perform with great results again and with a offbeat of 0.3ms I can life

looks good nice work kai

thanks friend, Im a little bit proud an happy it is working well again

It is special feeling, those minutes after successfuly fixed hairspring... Really cool!

Sent from my LG-D855 using Tapatalk

[tafari]

looks good nice work kai

thanks friend, Im a little bit proud an happy it is working well again

It is special feeling, those minutes after successfuly fixed hairspring... Really cool!

Sent from my LG-D855 using Tapatalk

indeed it is! evertime I service a movement and after assembling it finish and it perform great again it is just a happy feeling. I think you know what I mean