Page 5 of 6
Re: Angelus 240 SF - 2014 version with updates
Posted: March 3rd, 2020, 9:36 am
by Alou
They look nice yes 11 is a bit low but like you said for fun !
My JLC cloks are 42 and 43mm movements!
Re: Angelus 240 SF - 2014 version with updates
Posted: March 3rd, 2020, 2:52 pm
by Mellons
Yoda wrote: ↑March 3rd, 2020, 9:16 am
Derailing the thread a wee.
28 mm and 32 mm eight day movements with 11 jewels. They could have had a few more jewels, but they are actually running well and can be used for a cheap and fun daily beater.
20200303_155803_resized.jpg
Brilliant open up a few alternative case size options....
Re: Angelus 240 SF - 2014 version with updates
Posted: March 9th, 2020, 5:37 pm
by chrislovessushi
I’m sorry if I missed it somewhere, but could someone chime in with a little explanation of what’s involved with converting a key wind to a stem wind? I have an opportunity to get a 240 key winding alarm model in good condition for very cheap but I don’t want to pull the trigger if I’ll still need to source an impossible part/s like an entire keyless.
Re: Angelus 240 SF - 2014 version with updates
Posted: March 9th, 2020, 6:41 pm
by chrislovessushi
Yoda wrote:chrislovessushi wrote: ↑March 9th, 2020, 5:37 pm
I’m sorry if I missed it somewhere, but could someone chime in with a little explanation of what’s involved with converting a key wind to a stem wind? I have an opportunity to get a 240 key winding alarm model in good condition for very cheap but I don’t want to pull the trigger if I’ll still need to source an impossible part/s like an entire keyless.
Chile, the parts needed from Jorge and in the region of $600 for a full conversion.
Add $200 for the work and shipping.
I can break it down in detail if you like.
That’s what I need to know, thanks! Sounds like shelling out the extra $$$ for a stem wind is the best option.
Re: Angelus 240 SF - 2014 version with updates
Posted: May 3rd, 2020, 11:07 pm
by Tanukjaju
Re: Angelus 240 SF - 2014 version with updates
Posted: May 5th, 2020, 3:22 pm
by Tanukjaju
$150+ dollars in damage.....
Please remember not to force a date change on these clocks. Replacement hour wheels are one of the harder parts to find.
Re: Angelus 240 SF - 2014 version with updates
Posted: May 5th, 2020, 8:08 pm
by VanSong
Tanukjaju wrote:$150+ dollars in damage.....
Please remember not to force a date change on these clocks. Replacement hour wheels are one of the harder parts to find.
Ouch!
$150 is to fabricate a NEW piece HW or just to get an OLD HW parts?
Sent from my SM-N960F using Tapatalk
Re: Angelus 240 SF - 2014 version with updates
Posted: May 5th, 2020, 10:00 pm
by Tanukjaju
VanSong wrote: ↑May 5th, 2020, 8:08 pm
Tanukjaju wrote:$150+ dollars in damage.....
Please remember not to force a date change on these clocks. Replacement hour wheels are one of the harder parts to find.
Ouch!
$150 is to fabricate a NEW piece HW or just to get an OLD HW parts?
Sent from my SM-N960F using Tapatalk
I’m helping someone with a movement. That was the amount he paid for a used part.
Re: Angelus 240 SF - 2014 version with updates
Posted: May 5th, 2020, 10:17 pm
by VanSong
Sent from my SM-N960F using Tapatalk
Re: Angelus 240 SF - 2014 version with updates
Posted: April 14th, 2021, 9:48 am
by Emilio
Bump
