Interesting Aliexpress finds

papabear244 · Post by **papabear244** » June 30th, 2023, 12:06 pm

toofsy wrote:
miki360 wrote:So it can take 39mm dial and 37mm dial?
36,5mm dial from an old mini fiddy from getat and a 39 mm dial from nw

Does the 36.5mm fall through?

Sent from my iPhone using Tapatalk

toofsy · Post by **toofsy** » June 30th, 2023, 12:10 pm

papabear244 wrote: ↑June 30th, 2023, 12:06 pm
toofsy wrote:
miki360 wrote:So it can take 39mm dial and 37mm dial?
36,5mm dial from an old mini fiddy from getat and a 39 mm dial from nw
If you use dial with feet installed in the mouvement it should be ok but it really tinny. 37 should be perfect
Does the 36.5mm fall through?

Sent from my iPhone using Tapatalk

toofsy · Post by **toofsy** » June 30th, 2023, 12:21 pm

papabear244 wrote: ↑June 30th, 2023, 12:06 pm
toofsy wrote:
miki360 wrote:So it can take 39mm dial and 37mm dial?
36,5mm dial from an old mini fiddy from getat and a 39 mm dial from nw
If you use dial with feet installed in the mouvement it should be ok but it really tinny. 37 should be perfect
Does the 36.5mm fall through?

Sent from my iPhone using Tapatalk

Nottingham · Post by **Nottingham** » June 30th, 2023, 12:23 pm

papabear244 wrote:If only they would do 37mm LP/MM blanks that would be awesome. I remember seeing a lot of blanks for sale in the forum. Hardly any now.

Sent from my iPhone using Tapatalk

Check sponsor section of river mate, plenty of dials for awesome price

Post by **Mellons** » June 30th, 2023, 6:43 pm

Would case seller do bronze version?

Post by **daevildog** » July 1st, 2023, 2:06 am

Mellons wrote: ↑June 30th, 2023, 6:43 pm Would case seller do bronze version?

Spoke to seller rep, told them I was a Mod here and a bronze version and No CG version would be in hi demand.

Post by **daevildog** » July 1st, 2023, 3:45 am

Updated my comparison post with case specs

Post by **mykeos** » July 1st, 2023, 4:30 am

I just received 2 case sets I ordered.They arrived in 5 days (EU),which is nice.I noticed,though,that one case has the engravings (between the lugs and on cg),but the other doesn't have any at all.Anyone else experienced sth like that?

toofsy · Post by **toofsy** » July 1st, 2023, 4:33 am

mykeos wrote: ↑July 1st, 2023, 4:30 am I just received 2 case sets I ordered.They arrived in 5 days (EU),which is nice.I noticed,though,that one case has the engravings (between the lugs and on cg),but the other doesn't have any at all.Anyone else experienced sth like that?

On mine engraved number is missing on the CG and no gasket for CB

Post by **mykeos** » July 1st, 2023, 5:10 am

toofsy wrote: ↑July 1st, 2023, 4:33 am
mykeos wrote: ↑July 1st, 2023, 4:30 am I just received 2 case sets I ordered.They arrived in 5 days (EU),which is nice.I noticed,though,that one case has the engravings (between the lugs and on cg),but the other doesn't have any at all.Anyone else experienced sth like that?
On mine engraved number is missing on the CG and no gasket for CB

Some of these come with number on cg as gen?Didn't know,because the one that came engraved only has "brev ital",no number.

On the pozitive note,getting a non engraved case gives us an opportunity to get more gen like custom stamped/panthographed numbers.

Frequent Flyer

5 year veteran

Frequent Flyer

HF veteran

Strap maker

Skillful builder

5 year veteran

Frequent Flyer

HF veteran

Strap maker

Skillful builder

5 year veteran

Frequent Flyer

Prolific poster

MM perv

Microbrand guru

5 year veteran

Frequent Flyer

Moderator

VIP

Prolific poster

HF veteran

Italiano addict

Skillful builder

Good neighbour

5 year veteran

Frequent Flyer

Moderator

VIP

HF veteran

Good neighbour

5 year veteran

Frequent Flyer

Moderator

VIP

HF veteran

Good neighbour

5 year veteran

Frequent Flyer

VIP

HF veteran

8 giorni nut

5 year veteran

Frequent Flyer

HF veteran

Strap maker

Skillful builder

5 year veteran

Frequent Flyer

VIP

HF veteran

8 giorni nut