New dial movement cleaning in other words spa day for a daily

General watch-related discussion
Online
User avatar
straps68
Sponsor
Sponsor
Posts: 2474
Joined: April 11th, 2018, 2:13 pm
Location: Sandara Leatherworks

5 year veteran

Frequent Flyer

Moderator

VIP

Sponsor

Prolific poster

HF veteran

Strap maker

Re: New dial movement cleaning in other words spa day for a daily

Post by straps68 »

Xtreme wrote: January 21st, 2022, 7:38 am
straps68 wrote: January 21st, 2022, 3:07 am Nothing needs changing IMO, great work! And also that is one impressive hand setting tools you have!
Thanks straps68 i made that setting tool ages ago ive since made a few for local watch makers and improved on this one in my opinion this one is too big it takes up allot of real-estate on a bench
It does look like nothing I've seen before and I had a hunch that it was hand made. Really well done!
User avatar
TimemiT
Scoundrel
Scoundrel
Posts: 1292
Joined: May 31st, 2018, 8:21 pm
Location: Miami

Scoundrel

5 year veteran

Frequent Flyer

VIP

Prolific poster

HF veteran

8 giorni nut

Re: New dial movement cleaning in other words spa day for a daily

Post by TimemiT »

Awesome work! That is a serious hand setting machine! I'm always curious ... when do you know how much pressure to use when setting hands, and is there a risk of cracking a jewel if using too much pressure?
Alpacalypse Now
Xtreme
Super Lost Sheep
Super Lost Sheep
Posts: 89
Joined: February 27th, 2020, 8:28 pm

HF veteran

Skillful builder

Mad scientist

Re: New dial movement cleaning in other words spa day for a daily

Post by Xtreme »

TimemiT wrote: January 21st, 2022, 9:49 am Awesome work! That is a serious hand setting machine! I'm always curious ... when do you know how much pressure to use when setting hands, and is there a risk of cracking a jewel if using too much pressure?
Thanks TimeiT
If you look closely you can see a locking ring (silver knurled ring) this allows me to adjust the limit at which the plunger pushes down on the hand.
It's very precise, also the movement holder has a small pinion support pushing on the opposite side of the center wheel pinion so there is 0 stress on the jewel.
The only drawback is you need to make a specific holder for every movement type.

BTW your avatar is a riot :lol: :crazy:
User avatar
TimemiT
Scoundrel
Scoundrel
Posts: 1292
Joined: May 31st, 2018, 8:21 pm
Location: Miami

Scoundrel

5 year veteran

Frequent Flyer

VIP

Prolific poster

HF veteran

8 giorni nut

Re: New dial movement cleaning in other words spa day for a daily

Post by TimemiT »

:thumbup: ... I have one of those small cheap ones from China. I worry about cracking that bottom jewel with too much pressure

:lol: .. thanks, that my high school year book photo
Xtreme wrote: January 21st, 2022, 10:38 am
TimemiT wrote: January 21st, 2022, 9:49 am Awesome work! That is a serious hand setting machine! I'm always curious ... when do you know how much pressure to use when setting hands, and is there a risk of cracking a jewel if using too much pressure?
Thanks TimeiT
If you look closely you can see a locking ring (silver knurled ring) this allows me to adjust the limit at which the plunger pushes down on the hand.
It's very precise, also the movement holder has a small pinion support pushing on the opposite side of the center wheel pinion so there is 0 stress on the jewel.
The only drawback is you need to make a specific holder for every movement type.

BTW your avatar is a riot :lol: :crazy:
Alpacalypse Now
User avatar
daevildog
Moderator
Moderator
Posts: 970
Joined: April 10th, 2018, 9:01 pm
Location: In Traffic

5 year veteran

Frequent Flyer

Moderator

VIP

HF veteran

Good neighbour

Re: New dial movement cleaning in other words spa day for a daily

Post by daevildog »

Great work... :clap: :clap: :clap:
Post Reply